Jeep KJ Liberty 2005, Руководство по обслуживанию

Страница: 17 / 56

Symptom:
INSTRUMENT CLUSTER BULB
When Monitored and Set Condition:
INSTRUMENT CLUSTER BULB
When Monitored: Ignition On - Continuously
Set Condition: When the mechanical instrument cluster informs the ABM that the ABS,
Brake, and TCS (if equipped) indicators failed and can’t be illuminated.
POSSIBLE CAUSES
INSTRUMENT CLUSTER OR ABM DTC PRESENT
CHECKING INSTRUMENT CLUSTER OPERATION
INSTRUMENT CLUSTER SELF-TEST
INSTRUMENT CLUSTER INTERNAL FAULT
ABM - INTERNAL FAULT
TEST ACTION APPLICABILITY
1 Turn the ignition on.
With the DRBIII
t
, read DTCs.
Are there any Instrument Cluster or ABM DTCs present?
All
Yes
→
Refer to the appropriate category for the related symptom(s).
Perform ABS VERIFICATION TEST - VER 1.
No
→
Go To 2
2 Turn the ignition off.
Perform the Key-on Bulb Check.
Does the ABS, Brake, or TCS (if equipped) indicators light and then go out after four
seconds? All
Yes
→
Go To 3
No. Light remains after bulb check.
Go To 4
No. Indicator never came on.
Go To 5
15
BRAKES (25E)