Jeep Grand Cherokee, Руководство пользователя

Страница: 370 / 606

In Paddle Shift mode, the transmission will shift up or
down when (+/-) is manually selected by the driver,
unless an engine lugging or overspeed condition would
result. It will remain in the selected gear until another
upshift or downshift is chosen, except as described
below.
•
The transmission will automatically downshift as the
vehicle slows to a stop (to prevent engine lugging) and
will display the current gear.
•
The transmission will automatically downshift to first
gear when coming to a stop. After a stop, the driver
should manually upshift (+) the transmission as the
vehicle is accelerated.
•
You can start out, from a stop, in first or second gear
(or third gear, in 4LO range, Snow mode, or Sand
mode). Tapping (+) at a stop will allow starting in
second gear. Starting out in second gear is helpful in
snowy or icy conditions.
•
If a requested downshift would cause the engine to
over-speed, that shift will not occur.
•
The system will ignore attempts to upshift at too low
of a vehicle speed.
•
Holding the (-) paddle depressed will progressively
downshift the transmission to the lowest gear possible
at the current speed.
•
Transmission shifting will be more noticeable when
Paddle Shift mode is engaged.
•
The system may revert to automatic shift mode if a
fault or overheat condition is detected.
NOTE: When Selec-Speed or Hill Descent Control is
enabled, Paddle Shift mode is not active. Pressing the
(+/-) shift paddles in Selec-Speed or Hill Descent Control
simply limits the highest allowed gear. Shifts below and
up to that gear will occur automatically.
368 STARTING AND OPERATING