Jeep Grand Cherokee SRT 2017 Скачать руководство пользователя

Страница: 241 / 589

Frequently Asked Questions About Installing Child Restraints With LATCH

What is the weight limit (child’s

weight of the child restraint) for using the

LATCH anchorage system to attach the child

restraint?

65 lbs (29.5 kg)

Use the LATCH anchorage system until the com-

bined weight of the child and the child restraint

is 65 lbs (29.5 kg). Use the seat belt and tether
anchor instead of the LATCH system once the

combined weight is more than 65 lbs (29.5 kg).

Can the LATCH anchorages and the seat belt

be used together to attach a rear-facing or

forward-facing child restraint?

Do not use the seat belt when you use the

LATCH anchorage system to attach a rear-facing

or forward-facing child restraint.

Can a child seat be installed in the center posi-

tion using the inner LATCH lower anchorages?

Use the seat belt and tether anchor to install a

child seat in the center seating position.

Can two child restraints be attached using a

common lower LATCH anchorage?

Never “share” a LATCH anchorage with two or
more child restraints. If the center position does

not have dedicated LATCH lower anchorages,

use the seat belt to install a child seat in the cen-

ter position next to a child seat using the LATCH

anchorages in an outboard position.

Can the rear-facing child restraint touch the

back of the front passenger seat?

Yes

The child seat may touch the back of the front

passenger seat if the child restraint manufacturer

also allows contact. See your child restraint

owner’s manual for more information.

Can the head restraints be removed?

Yes

The head restraint may be removed in the center

seating position only.

SAFETY

239

Содержание Grand Cherokee SRT 2017













































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Grand Cherokee SRT 2017

Отзывы:

Похожие инструкции для Grand Cherokee SRT 2017

Бренды по названию

Популярные бренды

Jeep Grand Cherokee SRT 2017, Руководство пользователя

Результаты поиска

Содержание Grand Cherokee SRT 2017

Отзывы:

Похожие инструкции для Grand Cherokee SRT 2017

Бренды по названию

Популярные бренды