Stopping The Engine
After full load operation, idle the engine for a few minutes
before shutting it down. This idle period will allow the
lubricating oil and coolant to carry excess heat away from
the turbocharger.
NOTE:
Refer to the following chart for proper engine
shutdown.
Driving Condition
Load
Turbocharger Temperature
Idle Time (min.) Before
Engine Shutdown
Stop and Go
Empty
Cool
None
Stop and Go
Medium
0.5
Highway Speeds
Medium
Warm
1.0
City Traffic
Maximum GCWR
1.5
Highway Speeds
Maximum GCWR
2.0
Uphill Grade
Maximum GCWR
Hot
2.5
NOTE:
Under certain conditions the engine fan will run
after the engine is turned off. These conditions are under
high load and high temperature conditions.
Cooling System Tips — Automatic Transmission
To reduce the potential for engine and transmission over-
heating in high ambient temperature conditions, take the
following actions:
•
City Driving — When stopped, shift the transmission
into NEUTRAL and increase engine idle speed.
•
Highway Driving — Reduce your speed.
•
Up Steep Hills — Select a lower transmission gear.
•
Air Conditioning — Turn it off temporarily.
NOTE:
If the coolant temperature is too high the A/C will
automatically turn off.
4
STARTING AND OPERATING
29
Содержание grand cherokee 2018
