Jeep grand cherokee 2018, Руководство пользователя, Страница: 238 / 620

3. Route the tether strap to provide the most direct path for
the strap between the anchor and the child seat. If your
vehicle is equipped with adjustable rear head restraints,
raise the head restraint, and where possible, route the
tether strap under the head restraint and between the
two posts. If not possible, lower the head restraint and
pass the tether strap around the outboard side of the
head restraint.
4. For the center seating position, route the tether strap
over the seatback and headrest then attach the hook to
the tether anchor located on the back of the seat.
5. Attach the tether strap hook of the child restraint to the
top tether anchorage as shown in the diagram.
6. Remove slack in the tether strap according to the child
restraint manufacturer’s instructions.
WARNING!
• The top tether anchorages are not visible until the
gap panel is folded down. Do not use the visible
cargo tie down hooks, located on the floor behind the
seats, to attach a child restraint tether anchor.
(Continued)
Top Tether Strap Anchorage (Located On Seatback)
Top Tether Strap Mounting
236 SAFETY