Jeep Gladiator 2021 страница 37 Скачать руководство пользователя

Страница: 37 / 484

GETTING TO KNOW YOUR VEHICLE

STEERING WHEEL

ILT

ELESCOPING

TEERING

OLUMN

This feature allows you to tilt the steering

column upward or downward. It also allows you

to lengthen or shorten the steering column. The

tilt/telescoping control is located below the

steering wheel at the end of the steering

column.

Tilt/Telescoping Steering Column Control

To unlock the steering column, push the control

downward (toward the floor). To tilt the steering

column, move the steering wheel upward or

downward as desired. To lengthen or shorten

the steering column, pull the steering wheel

outward or push it inward as desired. To lock

the steering column in position, push the

control upward until fully engaged.

EATED

TEERING

HEEL

— I

QUIPPED

The steering wheel contains a heating element

that will warm the steering wheel in cold

weather. The heated steering wheel has only

one temperature setting. Once the heated

steering wheel has been turned on, it will stay

on until the operator turns it off. The heated

steering wheel may not turn on when it is

already warm.
The heated steering wheel control button is

located within the climate or controls screen of

the touchscreen.



Push the heated steering wheel button

once to turn the heating element on.



Push the heated steering wheel button a

second time to turn the heating element off.

NOTE:

The engine must be running for the heated

steering wheel to operate.

For information on use with the Remote Start

system, see

page

23.

CAUTION!



Hinge pins can break if overtightened during

door reinstall (Max Torque: 5.88

ft·lb /

N·m). For information on off-road driving

tips, see

page

215.



Do not over-tighten Torx fasteners. Damage

to the vehicle’s parts will occur.

WARNING!

Do not adjust the steering column while

driving. Adjusting the steering column while

driving or driving with the steering column

unlocked, could cause the driver to lose

control of the vehicle. Failure to follow this

warning may result in serious injury or death.

Содержание Gladiator 2021





































































































































































































































































































































































































































































































Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды

Jeep Gladiator 2021, Руководство пользователя

Результаты поиска

Содержание Gladiator 2021

Отзывы:

Похожие инструкции для Gladiator 2021

Бренды по названию

Популярные бренды