Jeep CHEROKEE 2017, Руководство пользователя

Страница: 30 / 86

NOTE:
•
Use of Climatized Ultra Low Sulfur Diesel Fuel or
Number 1 Ultra Low Sulfur Diesel Fuel results in a
noticeable decrease in fuel economy.
•
Climatized Ultra Low Sulfur Diesel Fuel is a blend of
Number 2 Ultra Low Sulfur and Number 1 Ultra Low
Sulfur Diesel Fuels which reduces the temperature at
which wax crystals form in fuel.
•
The fuel grade should be clearly marked on the pump at
the fuel station.
•
The engine requires the use of “Ultra Low Sulfur Diesel
Fuel” . Use of incorrect fuel could result in engine and
exhaust system damage. Refer to “Fuel Requirements”
in “Technical Specifications” for further information.
•
If climatized or diesel Number 1 ULSD fuel is not
available, and you are operating below (20°F/-6°C), in
sustained arctic conditions, Mopar Premium Diesel Fuel
Treatment (or equivalent) is recommended to avoid
gelling (see Fuel Operating Range Chart).
Engine Oil Usage
Refer to “Dealer Service” in “Servicing And Maintenance”
for the correct engine oil viscosity.
Engine Warm-Up
Avoid full throttle operation when the engine is cold. When
starting a cold engine, bring the engine up to operating
speed slowly to allow the oil pressure to stabilize as the
engine warms up.
If temperatures are below 32°F (0°C), operate the engine at
moderate speeds for five minutes before full loads are
applied.
Engine Idling
Avoid prolonged idling, long periods of idling may be harm-
ful to your engine because combustion chamber temperatures
can drop so low that the fuel may not burn completely.
Incomplete combustion allows carbon and varnish to form on
piston rings, cylinder head valves, and injector nozzles. Also,
the unburned fuel can enter the crankcase, diluting the oil and
causing rapid wear to the engine.
Stopping The Engine
After full load operation, idle the engine for a few minutes
before shutting it down. This idle period will allow the
lubricating oil and coolant to carry excess heat away from
the turbocharger.
NOTE: Refer to the following chart for proper engine
shutdown.
28 STARTING AND OPERATING