Jeep Cherokee 1977, Руководство пользователя

Страница: 92 / 136

•
()
C
•
C
'ii
:I
90
Wiper Element Replacement
On Cherokee, Wagoneer, and Truck models, the rubber
blade element can be removed by compressing the latch and
sliding it from the bridge. When installing the new rubber
element, the metal backing must engage all eight tabs on the
bridge.
BRIDGE
PRESS
� LATCH
/
Windshield Washer
Check reservoir fluid level regularly. The white plastic bottle
on the side of the wheelhouse can be easily spotted with the
hood open. Simply unsnap the cap and fill with mixture of
water and windshield washer solvent. See page 93.
Hood Latch
CJ Model•
The hood is secured to the front fenders by two hood
latches-one on each front side. To release, pull the latches
straight up and turn slightly. The hood may now be raised by
inserting the fingers between the center grille bars and pull­
ing the catch to the left.
CJ Model•
To secure the hood in the raised position, remove the support
bar from its retaining clip and Insert the free end Into the
support bar bracket.
Cherokee-Wagoneer-Truck
The hood lock release latch is located under the front center
of the hood, above the grille. To release the latch, reach in
under the hood, lift up on the hood latch with the fingers and
lift the hood.