Jeep 2016 Patriot Скачать руководство пользователя страница 386 | Manualshive

Страница: 386 / 589

Jeep 2016 Patriot Скачать руководство пользователя страница 386

Light

⬙

will illuminate and the “ESC OFF” message will

appear in the odometer. Push and release the Trip Odom-
eter button located on the instrument cluster to clear this
message.

In this mode, ESC and TCS, except for the “limited slip”
feature described in the TCS section, are turned off until
the vehicle reaches a speed of 35 mph (56 km/h). At
35 mph (56 km/h), the system returns to “Partial Off”
mode, as described above. TCS remains off. When the
vehicle speed drops below 30 mph (48 km/h), the ESC
system shuts off. ESC is deactivated at low vehicle speeds
so that it will not interfere with off-road driving however,
ESC function returns to provide the stability feature at
speeds above 35 mph (56 km/h). The

⬙

ESC OFF Indicator

Light

⬙

will always be illuminated when ESC is off.

To turn ESC on again, momentarily push the “ESC Off”
switch. This will restore the “ESC On” mode of operation.

NOTE:

The “ESC OFF” message will display and an

audible chime will sound when the shift lever is placed
into the PARK position from any other position, and then
moved out of the PARK position. This will occur even if
the message was previously cleared.

WARNING!

In the

ⴖ

Full Off

ⴖ

mode, the engine torque reduction

and stability features are disabled. In an emergency
evasive maneuver, the ESC system will not engage to
assist in maintaining stability. “ESC Off” mode is
intended for off-highway or off-road use only.

384

STARTING AND OPERATING

«
...
384
385
386
387
388
...
»

Содержание 2016 Patriot














































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды