Hard Top Removal
Follow these simple steps to remove the hard top.
1. Remove both front panels. Refer to “Front Panel(s) Removal” above.
2. Open both doors.
3. Remove the two Torx
®
head screws that secure the hard top at the B-pillar (near
the top of the door) using a #40 Torx
®
head driver (Four–Door Only).
4. Remove the six Torx
®
head screws that secure the hard top to the vehicle (along
the interior bodyside) using a #40 Torx
®
head driver.
5. Open the swing gate all the way to ensure clearance of the rear window glass. Lift
the rear window glass.
6. Locate and disconnect the wire harness on the left rear inside corner of the
vehicle.
7. Remove the washer hose (next to the
wire harness) by pinching the grips on
hose connector and pull downward.
8. Close the swing gate.
9. Remove the hard top from the vehicle.
Place the hard top on a soft surface to
prevent damage.
Step 6
OPERATING YOUR VEHICLE
49
Содержание 2015 Wrangler
