Jeep 2011 Wrangler Unlimited, Руководство пользователя

Страница: 50 / 88

COMMAND-TRAC™/
ROCK-TRAC™
• The transfer case provides four
mode positions: 2H (Two-wheel
drive high range), 4H (Four-wheel
drive high range), N (Neutral), and
4L (Four-wheel drive low range).
• The transfer case is intended to be
driven in the 2H position for normal
street and highway conditions such
as hard-surfaced roads.
• Shifting between 2H and 4H can
be made with the vehicle stopped
or in motion. Shift the transfer case
lever firmly to 4H at any speed up
to 50 mph (80 km/h).
• Shifting between 4H and 4L can be
made with the vehicle rolling at 2 to
3 mph (3 to 5 km/h). Shift the
automatic transmission into
NEUTRAL or fully depress the
clutch pedal on a manual
transmission. Shift the transfer case
lever firmly to 4L (do not pause with
the transfer case in NEUTRAL).
Once the shift is completed, place
the automatic transmission into
DRIVE or release the clutch pedal
on a manual transmission.
NOTE: To enhance off-road
performance in 4L mode, manual
transmission vehicles will start
regardless of whether or not the clutch
pedal is depressed.
AXLE LOCK (TRU-LOK™)
RUBICON ONLY
• The AXLE LOCK switch is located
on the instrument panel below the
climate controls.
• This feature will only activate when
the following conditions are met:
• Key in ignition, vehicle in 4L (Low)
range.
• Vehicle speed at 10 mph
(16 km/h) or less.
• Press the bottom of the AXLE
LOCK switch once to lock the rear
axle only and a second time to lock
the front axle (the rear and front
axle lock indicator lights will
illuminate).
• To unlock the axles, press the top
of the AXLE LOCK switch.
• The indicator light will flash until the
axles are fully locked or unlocked.
OFF-ROAD CAPABILITIES
48