Jeep 2010 FJ Cruiser, Руководство пользователя

Страница: 314 / 431

317
4-3. Do-it-yourself maintenance
4
Mainten
ance
an
d
ca
re
Wheels
If a wheel is bent, cracked or heavily corroded, it should be
replaced.
Otherwise, the tire may separate from the wheel or cause loss of
handling control.
■
Wheel selection
When replacing wheels, care should be taken to ensure that
they are equivalent to those removed in load capacity, diameter,
rim width, and inset*.
Replacement wheels are available at your Toyota dealer.
*: Conventionally referred to as “offset”.
Toyota does not recommend using:
●
Wheels of different sizes or types
●
Used wheels
●
Bent wheels that have been straightened
■
Aluminum wheel precautions (if equipped)
●
Use only Toyota wheel nuts and wrench designed for use with
your aluminum wheels.
●
When rotating, repairing or changing your tires, check that the
wheel nuts are still tight after driving 1000 miles (1600 km).
●
Be careful not to damage the aluminum wheels when using
tire chains.
●
Use only Toyota genuine balance weights or equivalent and a
plastic or rubber hammer when balancing your wheels.