Jeep 2009 Commander Скачать руководство пользователя страница 156 | Manualshive

Страница: 156 / 519

Jeep 2009 Commander Скачать руководство пользователя страница 156

The Electronic Speed Control lever is located on the right
side of the steering wheel.

To Activate

Push the ON/OFF button. The Cruise Indicator Light in
the instrument cluster will illuminate. To turn the Elec-
tronic Speed Control system OFF, push the ON/OFF

button a second time. The Cruise Indicator Light will
turn off. The Electronic Speed Control system should be
turned OFF when not in use.

WARNING!

Leaving the Electronic Speed Control system on
when not in use is dangerous. You could accidentally
set the Electronic Speed Control or cause it to go
faster than you want. You could lose control and have
an accident. Always leave the Electronic Speed Con-
trol system OFF when you are not using it.

To Set At A Desired Speed

When the vehicle has reached the desired speed, press
down on the Electronic Speed Control lever and release.
Release the accelerator and the vehicle will operate at the
selected speed.

Electronic Speed Control Lever

154

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
154
155
156
157
158
...
»

Содержание 2009 Commander








































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов