Jeep 2007 Patriot Скачать руководство пользователя страница 201 | Manualshive

Страница: 201 / 440

Jeep 2007 Patriot Скачать руководство пользователя страница 201

Power Switch/Volume Control (Rotary)
Press the ON/VOL control to turn the radio ON. Press
the ON/VOL a second time to turn OFF the radio.

Electronic Volume Control
The electronic volume control turns continuously (360
degrees) in either direction without stopping. Turning the
volume control to the right increases the volume and to
the left decreases it.

When the audio system is turned on, the sound will be
set at the same volume level as last played.

For your convenience, the volume can be turned down,
but not up, when the audio system is off and the ignition
is ON.

Mode Button (Radio Mode)
Press the mode button repeatedly to select between the
CD player, Satellite Radio, or Vehicle Entertainment
System (VES) (if equipped).

SEEK Button (Radio Mode)
Press and release the SEEK button to search for the next
listenable station in either AM/FM or Satellite (if
equipped) mode. Press the right side of the button to seek
up and the left side to seek down. The radio will remain
tuned to the new station until you make another selec-
tion. Holding the button will bypass stations without
stopping until you release it.

MUTE Button (Radio Mode)
Press the MUTE button to cancel the sound from the
speakers.

9

MUTE

9

will be displayed. Press the MUTE

button a second time and the sound from the speakers
will return. Rotating the volume control, turning the
radio ON/OFF, or turning OFF the ignition will also
return the sound from the speakers

NOTE:

In Hands Free Phone (if equipped) mode, the

MUTE button mutes the microphone.

200

UNDERSTANDING YOUR INSTRUMENT PANEL

«
...
199
200
201
202
203
...
»

Содержание 2007 Patriot

























































































































































































































































































































































































































































Отзывы:

Нет отзывов