Jeds Peds More! More! Moore! FV1, Руководство пользователя

Страница: 15 / 25

© Jeds Peds truebypass@jedspeds.co.uk More! More! Moore!
Pag
e
15
The pots connect to the PCB like this, by this stage you should have soldered the various other
components - resistors, diode, transistors and capacitors etc to the board. Check your soldering over
before moving forwards.
Now connect the pots and the toggles, as shown above.
Once they are connected, I would begin connecting the 3 x LED’s. Remember to use the enclosure as
your guide to this. The flat side of the LED goes to the square pad.