FM RECEIVING ANTENNA
The electric wave of FM broadcasting is weakening in hills and valleys, around buildings and in iron-reinforced buildings
because of its own nature.
INSTALLATION OF AN ANTENNA EXCLUSIVELY FOR FM
Connect the feeder of the antenna to the terminal of 300 ohms(Fig. 1-1) Listening to the broadcasting, fix it after deciding
the location and the direction so that the recipt condition may be optimum.
INSTALLATION OF AN ANTENNA USING THE COAXIAL CABLE
You may feel the noise at the crowded dawntown, city streets and factory sites as well as around power cables, even in
the case of using an antenna exclusively for FM. In these regions, install it through connection with a coaxial cable of
75ohms.
INDOOR ANTENNA
In the regions where FM broadcasting is heard comparatively well due to the near distance to the station or wooden
structure, you can receive broadcasting of good quality by using T-type antenna. Fix the antenna at the best place for
receipt after connecting it with a terminal of 300 ohms.(Fig. 1-1)
FM ANTENNA
FM DIPOLE ANTENNA
DIRECTION OF
BROADCASTING STATION
75
Ω
COAXIAL CABLE
AM
GND
AM
ANTENNA
GND
EARTH
FIGURE 1-1
C
ONNECTION OF THE ANTENNA AND THE EARTHING CABLE
9
