Once the panel is removed, you are going to
have to unscrew the bolts to remove the
cover. A
torx 20
head is required for removal.
You can use a dremel, or a manual
screwdriver for the process.
Once all the screws have been removed,
safely place them into an area for
safekeeping. Remove the metal trim below
the screws and place to the side. Remove
plastic bumpers and place to the side.
p h o t o c o u r t e s y : E V N e t w o r k Y o u t u b e C h a n n e l , T e s l a t i n o Y o u t u b e C h a n n e l
SETUP
