Current instructions at www.jeco-inc.com
1-800-893-3006
Page 2 of 4
To Assemble:
Step 1:
Carefully attach the pump (C) to the hose, making sure to place the pump in the
center of the bottom pots (B).
Step 2:
Align the top solar post light (A) to pot pillar (B).
Step 3:
Fill the basin (B) with clean water, making sure the pump (C) is fully submerged.
Note:
The maximum water level should be approximately 1.2 inches below the top edge of
the basin (B).
