
Current instructions at www.jeco-inc.com.
1-800-893-3006
Page 2 of 3
To Assemble:
Step 1:
Carefully attach pump (B) to the hose from the product body (A), making sure to
place the pump in the bottom of the wall fountain body (A).
Step 2:
Fill the basin (A) with clean water, making sure the pump (B) is fully submerged.
Note:
The maximum water level should be approximately 1.2 inches below the top edge of
the basin (A).
Step 3:
Finally, connect the plug of pump (B)to a GFCI outlet.
WARNING:
Always disconnect the pump (B) before placing your hands in the water.