Current instructions at www.jeco-inc.com.com
1-800-893-3006
Page 3 of 4
To Assemble:
Step 1:
Place the Fire Bowl (G) upside down on a level surface. Insert the square end of the Legs (H) into the slot
of the Fire Bowl (G) then fasten the Leg (H) by using 6 Bolts (AA).
Step 2:
Turn around the fire pit to have it stand upright on its legs. Attach the
Cooking Grill Support (E) at the
inside of the Fire Bowl (G) and the Decorative Ring Connector (D) at the outside of the Fire Bowl (G) by using 4
Bolts (BB) and 4 Nuts (CC).DO NOT tighten the hardware at this step.
Step 3:
Join two Decorative Ring Section (F) together and fit its joint into the arc slot of the Decorative Ring
Connector (D). Nip them with the Decorative Ring Connector (D) and facten by using 4 Bolts (BB) and 4 Nuts (CC).
Tighten the bolt and nut enough so that the tension will hold the ring section in place.Tighten all hardware at this
step.