10
Blade Maintenance
- Always clean the cutting blades after operation and lubricate with
Bosch Maintenance spray.
- Visually check the condition of the cutting edges of the cutting
blade 1.
- Ensure that the blade is covered with the blade guard supplied
when not in use.
Charging Procedure
- The battery charger supplied matches to the Li-ion battery
installed in the machine. Do not use other battery chargers.
- The Li-ion battery is protected against deep discharging. When
the battery is empty, the machine is switched off by means of a
protective circuit: The blade no longer moves.
- If the On/Off switch is subject to continued use, the Li-ion battery
can be damaged.
A The charging process starts as soon as the mains plug of the
battery charger 8 is inserted in the socket and the machine is
then placed on the battery charger. The battery charge indicator 3
lights up red to indicate the charging procedure.
- During the charging procedure, the handle of the machine
warms up. This is normal.
- When not using for extended periods, disconnect the battery
charger from the socket.
- Do not use the machine during the charging procedure.
Battery power status display
By pressing the button 2, the charge status is displayed by three
multi-coloured LED′s 3:
- Red LED is on <6.0 V
- Red + yellow LED′s are on
6.0-7.0 V
- All three LED′s are on
7.0-7.2 V
Once only the red LED is lit, the screwdriver must be re-charged.
