JDS Uniphase Wavetek DSAM-3500B, Быстрый старт

Страница: 63 / 88

Chapter 2 DSAM Meter Operation
Using Access Mode
DSAM Product Family Quick-Start Guide Rev. 001 47
Each Cable Modem AutoTest is based on two types of
configuration:
– The parameters or the selected channel plan
– The parameters of the selected limit plan
After a channel plan and a limit set has been selected,
press the
Start softkey and Cable Modem AutoTest
measures the signal performance of all assigned channels
in the Cable Modem Test configuration.
Using Access Mode
Use Access mode to efficiently manage your measure-
ment files and folders. You can also use Access to
synchronize your data with optional FDM utility software.
The Help system offers additional instruction about these
tasks.
Displaying the
Access Files
Menu
To display the Access Files menu ( Figure 35 on page 48 ),
press the Access mode key ( Figure 5 on page 18 ), then
press the Files softkey. Use the arrow keys to highlight the
task you wish to perform and press Enter .
Figure 34 Cable Modem Autotest Mode Screen