JDS Uniphase Talk-N-Trace TM-110, Руководство пользователя

Страница: 9 / 20

Battery Installation
Before first use or when the battery low
LED is on, install a 9 volt alkaline battery as
follows:
Remove rubber cap from bottom of unit
by peeling it off from any corner.
Unsnap battery cable from old battery.
Slide battery out of cavity and discard
properly.
Install new battery by sliding the bottom
end of battery into cavity.
Snap battery leads back onto battery.
Replace rubber battery cap.
)
2)
)
4)
5)
)