JDS Uniphase RM3 Series, Руководство пользователя

Страница: 9 / 47

viii
Frame or chassis terminal for electrical grounding within the unit.
Protective conductor terminal for electrical grounding to the earth.
WARNING The procedure can result in serious injury or loss of life if not carried out
in proper compliance with all safety instructions. Ensure that all
conditions necessary for safe handling and operation are met before
proceeding.
CAUTION The procedure can result in serious damage to or destruction of the unit if not
carried out in compliance with all instructions for proper use. Ensure that all
conditions necessary for safe handling and operation are met before
proceeding.
Laser Classification
Laser specifications defining the laser class and the maximum possible wavelength range and
power output of lasers used in this product, as submitted to the FDA, are outlined in Table 2.
For the exact specification of the lasers described in this manual, please refer to the
Specifications section.
Table 2: Laser Class and Parameter Limits
Parameter Specification
Wavelength 850, 980, 1310, 1480, 1550,
1625, or 1650 nm
Class 1*
Output power 0.32 mW maximum
* Per standard IEC 60825-1 and FDA standard 21CFR1040.10 except deviation per Laser Notice No. 50 July 2001.
Before Initializing and Operating the Unit
Inspect the unit for any signs of damage, and read the user’s manual thoroughly.
Install the unit as specified in the Getting Started section.
Ensure that the unit and any devices or cords connected to it are properly grounded.
Operating the Unit
Warning
To avoid the risk of injury or death, always observe the following precautions
before initializing the unit:
•
If using a voltage-reducing autotransformer to power the unit, ensure that
the common terminal connects to the earthed pole of the power source.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com