10
MP-SERiES USB POwER MEtER
The StOre button allows the user to capture the reading
and comments in an .CSV log. The log location can be
specified in the Setup/Optical Power Meter menu. The
Notes field allows you to add comments about the stored
reading.
NOTE:
You can also log by briefly pressing the button on the
USB OPM device.
You can also integrate power meter readings into your
inspection reports. To enable this, first go to the Setup/
Optical Power Meter and check the box that states
Link
OPM readings with fiber analysis
and click
OK
. Once this
is set up, follow these steps:
1.
Run an analysis on the fiber end face.
2.
Insert the fiber end into the OPM and take
measurement.
3.
Press the
Store
button (you may store multiple
power readings).
4.
Press the
Save Report
button.