JDS Uniphase cOPM-A1, Руководство по эксплуатации

Страница: 36 / 61

32 cOPM-A1 JDSU
6 M
EMORY
M
ANAGEMENT
Selecting the store location
When you press
[Store]
in measurement mode, the
results are stored at the active memory location. Each
time you press the key, the Meas # is incremented but
the Group # remains the same. You cannot select the
memory location, Meas # or Group # in measurement
mode.
If you do not want to overwrite existing data or if you want
to set a specific Group and Meas number, you must
open the MANAGE MEMORY menu and select the
location.
The procedure is the same as for displaying a memory
location (see
„Displaying stored results”, page 30 ), as
the last memory location displayed is always set as the
current memory location when storing data.
To save results at a selected location:
1. Set the wavelength and measurement mode as
required.
2. Select
Manage Memory
in the MAIN menu.
3. Press
[
▲▼
]
to edit the Meas # only.
Go to step 9 if you only want to edit the Meas #.
4. Press
[MENU ENTER]
.
The MANAGE MEMORY menu opens.
5. Press
[MENU ENTER]
again (
Select Group
is
highlighted).
The current Group # and Meas 001 are displayed.
6. Press
[
▲▼
]
to edit the Group #.
7. Press
[MENU ENTER]
.
Meas # is highlighted.
8. Press
[
▲▼
]
to edit the Meas #.
9. Press
[PREV]
to exit from the menu.
⇒
Press
[Store]
to store the results.