SAFETY PRECAUTIONS AND WARNINGS
To prevent personal injury or damage to the vehicle and / or scanning tools, please read
this user manual carefully before working on the vehicle, and at least observe the
following safety precautions:
Always perform automotive testing in a safe Environment.
Do not attempt to operate or observe the tool while driving the vehicle. Operating or observing the tool can
distract the driver and may result in an accident.
Wear safety goggles that meet ANSI standards.
Keep clothes, hair, hands, tools, testing equipment, etc. Keep away from all moving or hot engine components.
Operate the vehicle in a well-ventilated work area. Exhaust gases are poisonous.
Place obstacles in front of the drive wheels and do not leave the vehicle unattended during the test.
Be especially careful when working around ignition coils, distributor caps, ignition wires, and spark plugs.
The engine is running when these components generate dangerous voltages.
Shift the transmission to P or N and make sure the parking brake is engaged.
Put a fire extinguisher suitable for gasoline / chemical / electrical fires nearby.
Don't connect or disconnect any test equipments while the ignition is ON or the engine is running.
Keep the instrument dry, clean and free of oil/water or grease. If necessary, wipe the exterior of the
instrument with a mild detergent.
Our company is not responsible for any damage caused by the unintentional or intentional misuse of our
products or tools.
1