Assembly Instructions
10
Step
11
Step
12
Measure to
external corners
Squaring up the unit.
Ensure a
tape
measure
is used
to
square up
unit!
Important:
Before securing the back
it is necessary to square
up the unit.
You can do this by
measuring between
XX - XX and YY - YY
ensuring these are the
same (DIAG 1).
If they are not (DIAG 2)
Apply slight pressure as
indicated (DIAG 3) until
they are the same.
DIAG 1
DIAG 2
DIAG 3
XX
XX
XX
YY
YY
XX
YY
XX
XX
YY
YY
XX
XX
YY
YY
YY
Attach the backpanel
D
x20
F
x1
D
F
D
Ensure that the
backpanel is fully
inserted into groove.
Slide the back panel into
the end and top panel
grooves.
Use the panel pin guide
when locating the panel
pins. This will hold the
panel pins vertical and
ensure the correct
distance from the edge.
D
Plain chipboard surface.
