INSTALLATION
Installation
Dia.1.
1.
Screw the pole to the base.
2.
Remove the solar panel from the shade
and attach the plastic lamp holder cover
as illustrated.
3.
Re
-
attach the solar panel with plastic
cover to the shade.
4.
Screw the shade to the pole
5.
Placer the fitting on the required position
turn the switch bottom from the solar
panel on and test the fitting.
The LED light only can operate under a dark
atmosphere.
Battery Replacement (If required).
Dia. 2.
1.
Using a screw driver (not supplied),
un
-
screw the side screws to separate
solar panel box from the plastic round
support.
2.
Using a screw driver (not supplied),
un
-
screw the screws from the solar
panel box.
3.
Open the box and remove the old
battery.
4.
Insert new Lithium
-
Ion battery and
closed the box.
5.
Re
-
screw all the solar panel box screws
6.
Attach solar panel box to the plastic
round support screwing the side screws.
This product is suitable to use Lithium
-
Ion
battery cell or Li
-
Ion, abbreviated LIB
only
,
any other batteries type are not accepted.
Cleaning
-
Use a clean dry soft or slightly damp cloth.
-
Do not use abrasive cloths or polishes as this may
cause damage to the product.
APPROVED
25/11//2019
ISSUE 1
Q.C
Maintenance
PD484
J D Williams & Company Limited is part of N Brown Group plc. Griffin House,
40 Lever Street, Manchester, M60
6ES
Dia.1
Dia.2
1
2
3
4
3