Assembly Instructions
Marbury 4 Seat Cube Dining Set-Table
Note: All Bolt Head Caps and Nut Caps should not be attached before finally
tightening all Bolts with the Allen Key.
Only tighten all bolts when you are satisfied with the alignment of all components.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Step One
Put the the table top (Part A) on the ground, connect the table leg (Part C) with
the table top. Fasten table leg (Part C) with table top (Part A) by bolts (Part G)
and washers (Part I).
A
C
I
G
Step Two
H
B
I
Fasten table leg (Part B) with
table leg (Part C) by bolts (Part H)
and washers (Part I). Please ensure
the screws are tightend completely.
B
4/5
I
G
C
