1 Drawer Occasional Table Assembly Instructions
6
1
2
3
4
B
not supplied
Pozi (large)
5.0 x 35
B x2
C
C
12.0 x 11
C x2
Your furniture is assembled using a cam lock and dowel
system. This system combines a quick and easy
assembly with strength and a clean finish. Screw the
cam dowel into the panel in the positions shown.
Take care to ensure that the dowel is straight,
and is inserted the full length of the threaded
section.
Insert the cam lock into the face of the panel in the
positions shown.
Ensure that the cam arrow points towards the edge
with the hole as shown; this allows the head of the
cam dowel to locate properly in the cam lock.
a
b
C
B
B
Connect the drawer sections together by inserting
the wooden dowels (already located) in the back
drawer section to the left and right hand drawer
sections
8
9
8
9
10
SLIDE!
8
11
7
9
10
Plain chipboard
surface to the underside
6
5
not supplied
Pozi (large)
Using a hand screwdriver, turn the cam
clockwise until hand tight. This will take less
than one full turn and will tighten the cam on
the dowel, pulling the panels together
to create a tight joint. Then using the bolts
provided place the handle on to the front
of the drawer front, then turn clockwise to
tighten until secure.
C
B
7
G x1
I x1
3.5 x 18
