JCROffroad UNI-FPF-PC, Инструкции по установке

Страница: 4 / 4

1
The bracket will bolt together as shown below. The small angled bracket
highlighted in red will only be used on bumpers with completely vertical
fairleads. If your bumper has an angled fairlead, the hinge will bolt directly
to the fairlead-side bracket. The bracket will then slide over the winch line
and bolt behind the fairlead. The hinge will use 5/16" bolts and lock nuts.
NOTE:
The license plate bracket can be flipped to mount the plate higher if needed.
The fairlead and angled brackets are slotted to allow for front to back adjustment of the
license plate.