40” LIGHT BAR
ASSEMBLY
1
Slide 2 t-nuts into each of the channels on the top side of the front-most
crossbar using the slots. Then, place each light bar mount over one pair of
t-nuts and loosely bolt it in place using the 1/4”-20 X 3/8” button heads.
2
Next, place your light bar between the mounts and mount it in the slots
using the hardware provided with the light bar. After that is firmly in
position, make any adjustments to the positioning necessary to center the
light bar on the rack. Depending on the rack and light bar, you may need to
adjust the position of the cross bar in its slot as well.