JCROffroad JT OVERLAND BED RACK, Инструкция по установке

Страница: 10 / 19

ASSEMBLY
6
If you do not have the trail rail, you will need to clamp the legs to the bed,
to do so, loosely attach the c shaped bracket to the back of the bottom of
each of the legs using the 5/16”-18 x 1-1/2” carriage bolts and
5/16”-18 flanged nylock nuts. Make sure the 90-degree bend is on the
bottom and the carriage bolts go through the back side of the c shaped
bracket. Finally, push the c shaped brackets up until the edge of the bed is
between the brackets and the bottom of the legs and tighten them all into
place, clamping the bed rack onto the bed. Try to tighten each bolt evenly
in order to best secure the bed rack.