P/N 960-100175R_Rev. 6 {EDP #200824}
© 2016, JAPAN CASH MACHINE CO., LTD.
2 - 7
Installation
Taiko™ Series Banknote Acceptor
Section 2
Available Cleaning Card
A JCM Waffletechnology Bill Validator Cleaning
Card is now available (JCM Part No. 501-100252R,
Manufacturer’s Part No. KWJCM-B5B15M). The
Cleaning Card is designed to be used as a supple-
mental part of a Preventive Maintenance program
to help in reducing dirt and Paper dust build-up
within a Unit. This will optimize performance
between regular Preventive Maintenance intervals.
This is the only cleaning card authorized for use on
the Taiko (PUB-7/11) Validator (Figure 2-20).
Card Features
•
A unique Waffletechnology design that hugs all
surfaces to insure complete surface cleaning
•
Specially designed scrubber patterns insure
that belts and O-ring Rollers are cleaned and
lubricated to prevent them from drying out.
Directions For Use
1. Remove Cleaning Card from pouch and insert it
into the Banknote Validator.
2. The Cleaning Card will be accepted and then
automatically returned.
3. Dispose of used Card in an environmentally safe
manner.
For more information and a list of Authorized
Waffletechnology Distributers visit:
http://www.jcmwaffletechnology.com
.
Operational Check
Once the Taiko™ Unit is installed, perform the fol-
lowing steps to ensure the Taiko™ Unit is in its
normal Operational Mode:
1. Remove Power and perform Test No.5 “Accep-
tance Test Procedure” on page 6-7 of Section 6 in
this Service Manual. Return the DIP Switches to
their pre-Test Operational Mode positions, and re-
apply Power to the Taiko™ Unit.
Figure 2-20
JCM Waffletechnology Cleaning Card
New Cleaning Card
Cleaning Card Pouch
