JCM Taiko Series, Руководство по эксплуатации и обслуживанию

Страница: 18 / 86

P/N 960-100175R_Rev. 6 {EDP #200824} © 2016, JAPAN CASH MACHINE CO., LTD.
1 - 8
Section 1 Taiko™ Series Banknote Acceptor General Information
Unit Dimensions
T
AIKO
PUB-7 S
TANDARD
B
EZEL
U
NIT
O
UTSIDE
D
IMENSIONS
Figure 1-12 illustrates the Taiko™ PUB-7 Type 1, Type 2 or Type 3 Standard Bezel Unit outside dimen-
sions.
Taiko PUB-7/11 Unit Clearance Dimensions
Figure 1-13 illustrates the Taiko™ PUB-7/11 Unit’s open Acceptor clearance dimensions.
Figure 1-12 Taiko PUB-7 Complete Unit Out-
side Dimensions
A
83
Max. Banknote
Width 82
17.6
42.7
18
47.2 98
2mm - 6mm
88
51
3
66
4-M4
19
50
100
124
103
NOTE: All Dimensions are in Millimeters
Door Installation
Position
(Panel Thickness)
51 (Banknote
Ejection Position)
A = 68 (Type 1: Minimum Width @ 67mm)
76 (Type 2: Minimum Width @ 75mm)
71 (Type 3: Minimum Width @ 70mm)
Right Side
Rear Side
Front Side
Top Side
Bottom Side
Figure 1-12 Taiko PUB-7 Complete Unit Outside Dimensions
Figure 1-13 Taiko PUB-7/11 Banknote Accep-
tor’s Clearance Dimensions Overhead Space
3.93 inches
(100mm) or more
Depth Behind Unit
7.87 inches
(200mm) or more
Width
3.93 inches
(100mm)
or more
Depth Below Unit
3.93 inches
(100mm) or more
Banknote Ejection
Slot Position
Cash Box
Figure 1-13 Taiko PUB-7/11 Banknote Acceptor’s Clearance Dimensions