background image

Issue #4119-IGE-01-00

© 2020, JAPAN CASH MACHINE CO., LTD.

2

Section 1

RBA-40C™ Banknote Acceptor

General Information

Product Descriptions

Model Descriptions

Table 1 lists the product model number 

descriptions.

Type Descriptions

Table 2 lists the product type number descrip-
tions.

Software Descriptions

Table 3 lists the software number descriptions.

Precautions

The Figure 2 symbols are defined as follows:

1. 

(Type 1)

 Do not insert a damaged or exhibited 

unfit condition Banknote; it may cause a jam 

inside the unit.

2. 

(Type 2)

 Do not expose the unit to water. The unit 

contains several precision electronic devices that 

can be damaged if water or any liquid is sprayed 

or spilled into the unit.

3. 

(Type 3)

 Do not install the unit in a dusty 

environment. Dust may damage the unit or 

degrade its performance.

User Cautions

Careful measures were taken in the design of this 

product to ensure its quality; however, the follow-

ing cautions pertain to all users and should be fol-

lowed for safe operation.

Installation Cautions

The Installation Cautions are defined as follows:

1.  Do not allow the Unit to endure or operate at a 

high temperature, in high humidity and/or in a 

dusty environment.

2.  Do not install the Unit into an area where exces-

sive vibration or shock is present or strong exter-

nal pressure is applied.

3.  The Unit is not designed for outdoor installation. 

Be sure that the Host Machine contains enough 

protection to avoid wet or dusty conditions, 

including the internal unit assemblies, when 

installing in either an indoor or open-air space. 

4.  Avoid exposing the Unit to direct Sunlight and/or 

incandescent Lamp Illumination. (Refer to 

“Environmental Specifications” on page 7).

5.  Ensure that the Host Machine is designed for 

daily operational access for maintenance and/or 

clearing a Banknote Jam. (Refer to “Unit Dimen-

sions” on page 29).

6.  Do not use the Unit where it may be exposed to 

airborne evaporated or sporadic chemicals and/or 

oil.

Table 1 

RBA-40C Model Number Specifications

N

o

(1) Model Number

4 = Standard

(2)

Model Series Number

0 = Standard

1-9 = Reserved

Table 2 

RBA-40C Type Number Specifications

N

o

(1) Denomination (Country Code)

*

*. The Country Code is indicated per the ISO 3166 standard.

(2) 

Bezel

0 = Without Bezel (Standard)

1-9 = Reserved

(3)  Reserved

(4) 

Magnetic Sensor

0 = Without Magnetic Sensor (Standard)

1 = With Magnetic Sensor

(5) 

Interface Protocol ID

64 = ID-064GD

** = Last 2 digits of interface ID

†. Serial communication protocol developed by ADP.

Table 3 

RBA-40C Software Number Specifications

N

o

(A) Denomination (Country Code)

*

*. The Country Code is indicated per the ISO 3166 standard.

(B)  Interface Protocol Name
(C)  Software Version

Model: RBA - 4 0C

(1) (2)

Type: * * * (*) - * * * - * *

(1)

(4) (5)

(2)(3)

(A)

Software: RBA-40C  (* * *)  ID  0 * *  V * * *

(B)

(C)

Caution: User cautions should be 

included in any user guides or manuals.

Caution: Careful measures were taken in 

the design of this product to ensure its 

quality; however, ensure that a fail-safe 

design is used for the Host Machine to 

assure safety.

Figure 2 

Precautionary Symbols

Figure 2 

Precautionary Symbols

Type1

Type2

Type3

NOTE: Refer to “Banknote Fitness 

Requirements” on page 3.

Содержание RBA-40C













































Отзывы: