P/N 960-000164R_Rev. 3 {EDP #213631}
© 2018, JAPAN CASH MACHINE CO., LTD.
2 - 2 5
Installation
iPRO-RC™ Series Banknote Recycler
Section 2
Operational Flowchart (Continued)
Figure 2-23 depicts a typical iPRO-RC™ Retrieving/Cash Box flow process.
Figure 2-23
Figure 2-23
iPRO-RC Operational Flowchart (Retrieving/Cash Box)
C3) Return from Figure 2-22 “Retrieving”
Flowchart on page2-24 of this Service Manual
b) Is the Banknote being transported to the
Cash Box?
d) Stop transportation and sending Abnormal Signal
(*7)
a) Transport the Banknote to the Cash Box
A) To the Figure 2-16 “Primary Sequence” Flow
on page2-20 of this Service Manual
c) Was transportation retried three (3) times?
e) Retrieving the Banknote
f) Is the Cash Box FULL detected?
g) Stop performance and send the FULL Signal (*8)
h) Is the Banknote retrieved while dispensing error?
i) Has the number of required Banknotes retrieved
while retrieving sequence?
B2) To the Figure 2-20 “Dispensing” Flow
on page2-22 of this Service Manual
B3) To the Figure 2-22 “Retrieving” Flow
on page2-24 of this Service Manual
*7). When an Abnormal Signal is received, remove power, resolve the problem, and reapply Power to the iPRO-RC, or send
a RESET Command from the Host Machine to the iPRO-RC.
*8). When a “Cash Box Full” Signal is received, retrieve the Banknotes from the Cash Box, and re-seat the Cash Box back into
the Unit. The iPRO-RC will automatically perform its re-initialization movement operation.