P/N 960-000164R_Rev. 3 {EDP #213631}
© 2018, JAPAN CASH MACHINE CO., LTD.
A - 6
Appendix A
iPRO-RC™ Series Banknote Recycler
Troubleshooting
Reference Paper Handling
All JCM Reference Paper should be handled as follows:
1. Do not allow the Reference Papers to endure high temperatures and/or high humidity environments.
2. Store unused Reference Papers in their original Shipping Carton to avoid exposing them to direct Sunlight and/
or bright indoor light. Ensure that the Reference Papers being stored are not damaged as they are replaced back
into their shipping carton.
3. Do not use Reference Paper containing damaged areas that are worn, dirty, wrinkled, distorted
and/or discolored.
4. Use new Reference Paper for every 400 Units being calibrated. Incorrect calibration errors may occur when
using Reference Paper that has been used for calibration of more than 400 Units.
Table A-5
Additional Maintenance Equipment Parts List
Ltr.
EDP No.
*
*. A Product EDP Number that begins with a “G” is a Product developed by JCM-E Germany.
JAC No.
Description
Qty.
Remark
a
202366
Use EDP#
Reference Paper (KS-087)
1
b
G00205
501-100218R UAC Module
1
c
G00230
400-100249R UAC USB Cable
1
d
G00213
302-100007RA Power Cord (USA or Euro)
1
For UAC
e
G00286
Use G#
AC Power Adaptor
1
For UAC
f
G00388
Use G#
iPRO-RC Harness
1
For ID003/
ccTalk
Maintenance Equipment Requirements
This section provides product information for obtaining the additional iPRO-RC™ Maintenance
Equipment.
Figure A-7
Additional Maintenance Equipment
Additional iPRO-RC Maintenance Equipment
NOTE: Only the European
Connector Version is shown here.
Order the “JAC No.” to obtain the
USA Style AC Wall Plug.
b
d
e
c
a
f
Figure A-7
Additional Maintenance Equipment Requirements