© 2017 JCM American Corporation
1 4
August, 2017
USING THE JCM DFU DOWNLOADER
To update the GEN2U Printer Firmware, proceed as follows:
1. Connect a USB Cable between the USB Update Port on the right side of the
GEN2U Printer (refer to Figure 2
k
on page 4) and the PC.
2. Apply power to the GEN2U Printer.
3. From the PC Desktop, double-click on the
JCM DFU Downloader Application
icon to launch it.
The Printer status will display as
1 device connected
a
).
4. If no Printer is detected, Drivers will need to be installed. (Drivers are installed
automatically when the Printer is connected to a PC.)
5. Click on
Select FIRMWARE
.
The PC’s web browser opens automatically.
6. Select the proper Firmware version.
The
JCM DFU Downloader
screen will indicate the following information:
-
File Name
-
File Type (DFU, SHA)
-
Printer Model Format
a
Figure 12
JCM DFU Downloader Application UI
NOTE: If Printer Drivers need to be installed manually, contact JCM Technical Support
at (800) 683-7248.
