GEN2U™ Printer
© 2016, JCM Global Corporation
16
Part No. 960-000177R_Rev. A
Manual Cleaning
Use the following procedure for Manual Cleaning of the Printer:
1. Slide the Printer out of the EGM.
2. Remove Tickets from the Printer’s Paper Tray (Figure 13
a
).
3. Press the Lid Release Lever toward the rear of the Printer to release the lid
c
).
4. Rotate the Lid up in the direction indicated by the red arrow (refer to
a
on page 17) to access the Printer interior.
5. Use Non-Flammable Compressed Air to blow out excessive dust and dirt
from the following areas within the Printer:
– Ticket-In Slot (Figure 13
b
)
– Presenter Assembly (refer to Figure 14
b
on page 17)
– Print Head (refer to Figure 15
b
on page 17)
– Paper Tray (Figure 13
a
)
b
a
c
Figure 13
Cleaning the Ticket-In Slot w/ Compressed Air
NOTE: Insert the Compressed Air canister’s tube into
the Ticket-In Slot approximately 1 inch from the right
edge of the Slot.
GEN2U_Fl
ipBoo
kRev
A_v12
.fm Page 16 Thursd
ay, Octob
er 6,
2016 1:2
9 PM
