JCM EBA-30, Руководство по обслуживанию

Страница: 94 / 104

7 - 28
When your serial number is written successfully, "Writing OK" appears (See Fig-53).
Fig-53
{*** Function ***}
1...Write serial number
2...Read serial number
3...Exit
Enter the funcion number and the Enter key.
*** Warning! ***
[Input the last 6 digits serial number on the label of acceptor head unit.]
Enter serial number and the Enter key.
Serial number ?: 123456
Writing result : [123456] ---> Writing OK!
CHAPTER 7
Writing Serial Number
(8) Confirm the high-speed blinks on the LEDs of CPU board.
The serial number writing is complete.
Turn off the power of VM-30.
To write serial number to other EBA(s), repeat the steps (3) to (9) above.
To exit from the program, input "3" (Exit) on each menu.
When the serial number is written in the acceptor, make sure to input the same number to the host
machine.
If the numbers of acceptor and host machine are different, communication with ccTalk protocol can not
be established.