14
4
Programming
Free
applications manual for Free system
4.2
Trigger programming
The trigger allaows to program Codes and Groups. Both are done thanks to the push button and following the color indications
given by the led.
Channels: 4 channels maximum
To start to program the channels of the trigger, the push button of it must be pressed. Then the led will start blinking slowly and
showing a red color. Each blink equals a channel. To selec the channel, it must be released the push button once we arrive to
the desired channel.
Red led will remain in red showing that the channel has been selected.
Channel 2 programming example:
Groups: 7 groups maximum
To program a group, the functionning is quite similar to the channels procedure. Push button of the trigger must be pressed. Led
will show the red slowly blinkings of the channels configuration. But we must keep pressing, then led will show green blinkings
in a really fast way. This meants that groups programming is comming. Once the fast green blinking are over, the slowly green
blinking appears. Each slowly green blinking means a group. To select a group, it must be released the push button once the
group desired is achived.
Green led will remain for a while indicating that the group has been selected properly.
Functionning mode
Press push button to
select the channel
Stop press
Channel 1
Channel 2
Channel 3
Channel 4
Functionning mode
Keep pressing the
push button to select
the group
Press push button to
select the channel
Press the push button
to select the group
Fast flashings
Stop press
Channel 1
Group 1
Channel 2
Group 2
Channel 3
Group 3
Channel 4
Group 4
be a step ahead with technology and imagination
jcm
technologies
