JCM Technologies ACTIVA, Руководство пользователя

Страница: 6 / 28

Connections terminals
+ Alimentación, 12 V
-
Supply voltage,
ground
S Coded signal
Disconnect the power before handling.
• Connect the three terminals to match the settings on the receiver unit installed
inside.
• To connect the ACTIVA antenna and the receiver unit located inside the facility, use
a 3-wire twisted sheathed cable.
In the case of using standard 4-strand cable, the correct connection is as follows:
Cable connection enlarged
For extreme cases of more than 200 metres distance, the cable
can be extended some metres further by placing a 1K resistance
between the "S" and "-" terminals, always depending on the inter-
ference that may arise in the installation itself.
jcm technologies
6