jcm-tech CONNECT4 CC, Руководство пользователя

Страница: 5 / 20

Operating
The CONNECT-MCH FC i s a recei ver that wi l l pass i ncomi ng frames from remote control s vi a a sel ected channel (1 out of
4) towards a central (Led TX= ON).
The channel depends on the button that i s pressed on the remote control .
The frame that i s del i vered at D0-D1 of channel CH1/CH2/CH3/CH4 i s of type WIEGAND.
Wiegand formats:
W26, NO Facility Code:
• 1 bit - Even parity (of next 12 bits)
• 4 bit – Zeros
• 20 bit – Remote control number, complete.
• 1 bit - Odd parity (of last 12 bits)
W26, with Facility CODE:
• 1 bit - Even parity (of next 12 bits)
• 8 bit – Facility Code as set by 8 switches.
• 16 bit – Remote control number, lower part (*)
• 1 bit - Odd parity (of last 12 bits)
(* ): up to 65536 remote control s wi th consecuti ve numbers may be used.
W37:
• 1 bit - Even parity (of next 18 bits)
• 8 bit – Counter
• 2 bit – Zeros
• 3 bit – Substitute
• 3 bit – Channel DCS
• 19 bit – Remote control number
• 1 bit - Odd parity (of last 18 bits)
jcm technologies
5