ALRS2 USER INSTRUCTIONS
4 |
P a g e
V e r s i o n J C M - A L R S 2 - V 4
User Instructions
Switching the system on
Where the load cell has an On/Off switch
On the load link there is a switch
press to 1 position to switch the link on and press 0 to
switch the link off.
Where the load cell has no On/Off switch
While the handset is switched off the transmit board in the load cell will go to sleep and not
transmit. When you switch the handset on it will also wake up the transmit board to start
transmitting.
To switch the ALRS2 electronics on press the power button
this will switch on both the
transmit board inside the load cell and the handset.
Switching the ALRS2 handset on
To switch the ALRS2 on press the power button
Tare and Zero
To zero the load displayed on the handset, enter the Tare mode by pressing the tare button
The display will show the following message
You will have the following options:
Set
–
the tare. This will tare the gross weight from your reading.
No. You will be returned to the previous menu
Zero. This will zero any load
under 4% of your WLL, ‘Working Load Limit’
.
When you have selected your option press ok