JCM GLOBAL VEGA 100, Руководство по обучению обслуживанию, Страница: 8 / 24

Part No. 960-000165R_Rev. 1 © 2013, JCM American, Corporation
8
Lecture Notes
VEGA™ Banknote Acceptor JCM Training Overview July, 2013
VEGA SU/SD Unit (Continued 1)
6. Connect the attached Bezel Plate
(See Figure 4 a ) on the VEGA SD/
SU Bracket (See Figure 4 b ) using
two (2) M4 screws (See Figure 4 c
1
& c
2
).
7. Mount the VEGA SD/SU Bracket
into place on the Host Machine
using two (2) M4 Hexnuts
(See Figure 4
d
1
& d
2
).
8. Remove the Course Path Reversing
Guide and bolt the VEGA SD/SU
Unit into the VEGA SD/SU
Bracket on the Host Machine using
two (2) M4 Screws (See Figure 5
a
1
& a
2
) and two (2) or four (4) M4
Hexnuts (See Figure 5 b
1
, b
2
, b
3
, &
b
4
).
9. Seat the Cash Box (See Figure 6 a )
into the frame and replace the
Course Path Reversing Guide cover
on the Upper Section (See Figure 6
b ).
Figure 4 M4 Nut and DIP Switch
Locations
b
a
c
2
c
1
d
2
d
1
NOTE: The bolt lengths should
not extend more than 15mm
upward from the Host Machines
base.
Figure 5 M4 Screw and Nut Locations
a
1
a
2
b
1
b
3
b
4
b
2
NOTE: The number of Screws
required depends on each Host
Machine's specification
requirements.