JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 76 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 6
Section 6 UBA™ Pro Series Universal Banknote Acceptor Calibration and Testing
9. Confirm that the Sensor Calibration Program
Screen appears (Figure 6-25).
10. Click the “
Sensor Calibration
” button (Figure
6-25 a ).
11. Click the “
Start
” button (Figure 6-26 a ) to
begin the Sensor Calibration “Without Paper”.
12. 1st “
Calibrate DA without paper
” through 3rd
“
Calibrate time without paper
” items will auto-
matically run.
13. The Sensor Calibration will pause before the
“With Paper” calibration.
14. Open the UBA Pro’s Cover (Figure 6-28 a ).
15. Place the Reference Paper (Figure 6-28 b ).

(Refer to “Placing Reference Paper” on page 6-5
for detailed instructions.)
16. Close the UBA Pro’s Cover until it “clicks” into
place.
17. Click the “
OK
” button (Figure 6-29 a ) to
begin the Sensor Calibration “
With Paper
”.
18. 4th “
Calibrate gain with paper
” through 5th “
Cali-
brate bar DA with paper
” calibration will auto-
matically run.
Figure 6-25 Sensor Calibration 3
Figure 6-25 Sensor Calibration 3
a
NOTE: If the Start button is grayed out
(off), check the USB cable connection.
Figure 6-26 Sensor Calibration 4
Figure 6-26 Sensor Calibration 4
a
Figure 6-27 Sensor Calibration 5
Figure 6-27 Sensor Calibration 5
Progress Bar
In-operation Item
Reset to restart Calibration
when an error occurs.
= Done
= In-operation = Error
Figure 6-28 Sensor Calibration 6
Figure 6-28 Sensor Calibration 6
a
b
Figure 6-29 Sensor Calibration 7
Figure 6-29 Sensor Calibration 7
a
Figure 6-30 Sensor Calibration 8
Figure 6-30 Sensor Calibration 8
Progress Bar
In-operation Item
Reset to restart Calibration
when an error occurs.
= Done
= In-operation = Error