JCM GLOBAL UBA Pro RT Series, Руководство по эксплуатации и обслуживанию

Страница: 101 / 196

P/N 960-000213R_Rev.A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 9
Calibration and Testing UBA Pro RT/RQ™ Series Banknote Recycler Section 6
Feed Motor Speed Reverse Rotation Test (RT
Transport)
To perform the Feed Motor Speed Test in the
reverse rotation on the RT Transport side, proceed
as follows:
1. Ensure that the Recycler and Cash Box is prop-
erly installed.
2. Launch the Performance Test Program (see
page 6-7).
3. Select “
TWIN_FEED_MOTOR_REV_TEST
”
(Figure 6-39 a ).
4. Click the “
Start
” Screen Button (Figure 6-
39 b ) to begin the Test.
5. The measured speed will appear in the “
RC-Feed
Motor (RC-Twin)
” area (Figure 6-40 a ) on the
Screen.
6. Confirm that the motor speed is in the acceptable
range: 600mm/sec to 900mm/sec.
7. Click the “
Stop
” Screen Button (Figure 6-
40 b ) to end the test.
Flapper Motor Operation Time Test (RT

Transport)
To perform the Flapper Motor Operation Time Test
on the RT Transport side, proceed as follows:
1. Launch the Performance Test Program (see
page 6-7).
2. Select “
TWIN_FLAPPER_MOTOR_TEST
” (Fig-
ure 6-41 a ).
3. Click the “
Start
” Screen Button (Figure 6-
41 b ) to begin the Test.
4. The measured time will appear in the “
RC-Flap-
per (RC-Twin)
” area (Figure 6-42 a ) on the
Screen.
5. Confirm that the operation time is in the accept-
able range: 300msec to 950msec.
6. Click the “
Stop
” Screen Button (Figure 6-
42 b ) to end the test.
Figure 6-39 Feed Motor Speed Reverse
Figure 6-39 Feed Motor Speed Reverse Rotation
Test (RT Transport) 1
a
b
Figure 6-40 Feed Motor Speed Reverse
Figure 6-40 Feed Motor Speed Reverse Rotation
Test (RT Transport) 2
a
b
Figure 6-41 Flapper Motor Operation Time Test
Figure 6-41 Flapper Motor Operation Time Test
(RT Transport) 1
a
b
Figure 6-42 Flapper Motor Operation Time Test
Figure 6-42 Flapper Motor Operation Time Test
(RT Transport) 2
b
a
Scroll