JCM GLOBAL TBV-100 FLD, Краткое руководство пользователя

Страница: 8 / 26

TBV™-100/101 Units
© 2019 JCM Global Corporation
8
Part No. 960-000207R_Rev. A
JCM T
OOL
S
UITE
The JCM Tool Suite application is used to download Firmware,
check statistics history, perform function testing and calibrate the
TBV Unit. The JCM Tool Suite is a Windows
®
based PC application.
O
PERATIONAL
M
ODE
/ T
EST
M
ODE
When the TBV Unit is in
Operational Mode
and
DIP Switches DS1
or
DS3
are all
OFF
, the
Download, Statistics and Event Log View
options
are accessible from the JCM Tool Suite Service Mode Options menu
(refer to Figure 2 and Table 8).
When the TBV Unit is in
Test Mode
and
DIP Switch DS1
or
DS3
Switch #8
is
ON
:
• The
TBV Status LED Indicator
flashes
White
; and
•
Sensor Adjustment
and
Performance Test
options are accessible
from the
Service Mode
drop-down menu (Figure 2
a
/ Table 8).
Figure 2 JCM Tool Suite Service Mode Drop-down Menu
NOTE: Refer to the JCM Tool Suite ™ Software Installation
Guide (JCM P/N 960-100923R) for further information.
a
NOTE: Refer to Table 8 JCM Tool Suite Application Functions
on page 9 for descriptions of Sensor Adjustment and
Performance Test Options.